| STANDARD PERFORMANCE |
| Nitriles (Buna-N, NBR) |
-35°F |
+275°F |
| N4400A75, N4180A80, N9643A90 / N9589A80. Excellent compression set resistance, peroxide cure, API 11D1 for packer elements. Applications: Petroleum lubricants, sea water and diesel fuel. |
| Hydrogenated Nitriles (HNBR) |
-40°F |
+300°F |
| N4031A85 (EPS) / KA183A85 (ORD), N4035A80, N4025A80, N4007A95, N4288A85, RH1170A90. NORSOK M-710 Certified for H2S and sweet service. Excellent low temperature capability, extrusion resistant, abrasion resistant, compression set resistant, NACE TM0 192-2003 Standard. Applications: High abrasion, high temperature and low temperature resistance. Good in Flex Fuels MTBE. |
| Ethylene Propylene (EPDM, EPR) |
-60°F |
+500°F |
| E0962A90. Developed for steam service. Geothermal, high temperature, high pressure steam (intermittent to 550°F), resistant to CO2, H2S, methanol, glycols and explosive decompression. |
| Nitroxile® (Carboxilated Nitrile) |
-20°F |
+275°F |
| N4263A90, N4257A80, N4274A85. Excellent abrasion resistance. Internally lubricated for lower friction, Extreme low friction, Applications: Petroleum lubricants, seawater and diesel fuel. |
| Fluorocarbon (FKM) |
-15°F |
+400°F |
| V4205A75, V1238A95, V4208A90, RV1121A90, VG109A90, V4266A95. Various general-purpose fluorocarbons including NORSOK M-710 certified V1238A95. Excellent compression set resistance. Maximum extrusion resistance and explosive decompression resistant. Applications: Low temperature, high temperature, high pressure, petroleum oils & fuels, H2S. |
| HIGH PERFORMANCE |
| Perfluorinated Elastomers (FFKM) |
-15°F |
+550°F |
| FF200A75, FF580A75, V8545A75, V8588A90 ParofluorTM. High temp resistant perfluorinated elastomer. Good compression set resistance, extreme chemical resistance and low leachables. Extreme temperatures, chemical mixtures, high concentration H2S, amines, steam, polar fluids, solvents. |
| Highly Fluorinated Elastomers |
-15°F |
+400°F |
| V3819A75, V8534A90 (HifluorTM). Highly fluorinated material. Lower temperature range, cost-effective alternative to perfluorinated materials. Improved compression set and abrasion resistance. Extrusion resistant version available. Resistant to aggressive chemicals, ketones, amines, acids and bases, polar fluids. |
| AFLAS®1 TFE |
-15°F |
+450°F |
| V4461A90, V1041A85. Improved compression set resistance. Applications: Amines, H2S, steam, high temperature. Certified to NORSOK M-710. Passes NACE TM0 192-2003 Standard. |
| THERMOPLASTICS |
| Thermoplastic Elastomer Materials |
-65°F |
+300°F |
| Resilon® P4350A90, P4300A90, P4301A90, P4700A90, Molythane® P4615A90. Parker branded improved blends and high performance polyurethanes with improved compression set and rebound properties, waterand extrusion-resistance capabilities. Water resistant Resilon P4301A90 to +225°. High temperature Resilon P4350A90 to +300°F. |
| Plastic Alloy Materials |
-65°F |
+275°F |
| Polymyte® Z4651D60, Resilon® P4312D60, MolyGard® W4650, Nylatron®2 W4655. High tear strength, abrasionand extrusion-resistant. Excellent resistance to petroleum fluids, many phosphate ester fluids, some chlorinated hydraulic fluids, up to 180°F in water, oxygen, common solvents, ketones, alkalis, dilute bases, mineral acids, weak acids. |
| HPHT |
| PEEK®, UltraCOMPTM Engineered Thermoplastics |
-65°F |
+500°F |
| W4685, W4686, W4738, W4678, W4773. Parker brand of PEEK. Neat, non-filled and filled blends available (carbon, graphite, glass, PTFE). |
| PTFE |
-450°F |
+550°F |
| 0100, 0130, 0201, 0204, 0317, 0318, 0502, 0622, 0901. Virgin & variously filled PTFE (carbon, glass, moly, bronze) blends available depending upon application parameters for wear resistance, abrasion resistance and speed. UHMWPE (0901) for high wear resistance and H2O based media. |
| FILLED |
| Specialty Fillers / Filled Materials |
| Natural rubbers enhance elongation properties in oilfield rubber products. Neoprene and FKM fiber (non-fabric, fabric) filled elastomers. |